Allnic Audio ZL-3000 mk2 Højttalerkabler
Allnic Audio ZL-3000 mk2 Højttalerkabler
The ZL-3000 mk2 is speaker cables with ZL Technology, specially designed by Allnic Audio. ZL-5000 speaker cables utilize Allnic’s patented double-bladed spade termination that ensures no loosening for years.
- OFC conductors
- 1000 °C hot melt welding of cable terminations and wire
- Allnic’s patented, maintenance-free double-bladed terminations
- Optimum thickness of wire
“In fact, the reason for this Mu/ZL naming is all down to the company’s ‘Zero Loss’ Technology. This is Allnic Audio’s own concept, claimed to limit signal losses through audio cables by minimizing linkage, contact, and wire resistance effects. Actually, this is three separate methodologies joined together in making better wire. So, to reduce linkage resistance, Allnic eschews the regular solder and instead uses 1,000°C hot-melt welding between cable terminations and wire. This also means no more poorly screwed down terminal housings. Contact resistance is reduced by using three separate but proprietary methods, one for analogue and digital interconnects, one for speaker cables, and one for power cords. Allnic also uses heat treatment for longer contact pressure and uses ‘patented’ double blade spade speaker terminals.”
| Technical Specification | |
|---|---|
| Conductors | OFC |
| Insulation | Silicon, PVC |
| Outer Jacket | Crystal-clear PVC, Pure copper |
| Diameter | 12mm |
| Splitter | Black Duralumin with 4 silicon rings |
| Terminations |
Patented high-tension, Rothium-coated titanium spade |
Zero Loss Technology & Mu-metal Shield
Allnic Audio’s speaker cables, power cables, phono cables, and interconnect cables use Zero Loss (ZL) Technology for eliminating audio cable signal loss by minimizing three resistances; Linkage Resistance, Contact Resistance, and Wire Resistance. All of Interconnect cables use Mu-metal as a braided shield. Signal cables use Mid-Range Control Technology (MRCT).
Carved out heat-treated Beryllium copper terminals for permanent contact pressure
Contact resistance is a very important factor in signal transmission. Higher contact pressure and larger contact surface mean less contact resistance and better signal transfer. With traditional bronze, pure copper or phosphorous copper terminals you could not have enough contact pressure nor permanent one. With our carved out, slit, heat-treated Beryllium copper terminals, you have strong and permanent contact pressure for minimum contact loss.
Mu-metal shielding for true protection from EMI
With traditional copper or silver meshed shield, you have not enough protection from magnetic noise. Copper or silver could protect well against electric noise, but very poorly does against magnetic one, because magnetic signal freely penetrates copper or silver. Only Mu-metal (Nickel alloy material) could protect your audio signal from both electro-magnetic noise. Data shows Mu-metal reduces magnetic noise to 1/32 times( – 32dB), of course, it protects electric noise perfectly either.
Mere information HER