Allnic Audio ZL-8000 Jumpers

Leveringstid forventet 2-3 uger hvis ikke på lager.

De bedste højtaler jumpers vi har hørt uanset pris!!

Kontakt os for individuelle længder!

”ZL-8000S is the first silver wire speaker cable released by Allnic Audio. The ZL-5000 and ZL-3000 used oxygen-free copper wires as conductors. As you know, Silver has high conductivity. While conductivity of Copper is 100, Silver’s one is 106. However, heavy and low-pitched bass was the weak point of silver wire speaker cables. On this point, Allnic cared. ‘Yes. Existing silver wire cables have a good treble characteristics, but the bass is not so good as the treble. This is due to the fact that the manufacturers, who are too confident about the silver wire, use it with low gauge. So the ZL-8000S uses a high-purity silver wire conductor as very thick. Is it plated? It is not. Inside the PVC sheath, another conductor for damping and insulation was added.'”

Technical Specification:
Conductors Silver, OFC
Insulation Silicon, PVC
Outer Jacket Crystal-clear PVC, Pure Copper
Diameter 18mm
Length 2.5m (standard), 3m
Splitter Silver duralumin
Terminations Patented high-tension, Rothium-coated titanium spade lugs

Allnic Audio’s speaker cables, power cables, phono cables, and interconnect cables use Zero Loss (ZL) Technology for eliminating audio cable signal loss by minimizing three resistances; Linkage Resistance, Contact Resistance, and Wire Resistance. All of Interconnect cables use Mu-metal as a braided shield. Signal cables use Mid-Range Control Technology (MRCT).

Mu-metal shielding for true protection from EMI

With traditional copper or silver meshed shield, you have not enough protection from magnetic noise. Copper or silver could protect well against electric noise, but very poorly does against magnetic one, because magnetic signal freely penetrates copper or silver. Only Mu-metal (Nickel alloy material) could protect your audio signal from both electro-magnetic noise. Data shows Mu-metal reduces magnetic noise to 1/32 times( – 32dB), of course, it protects electric noise perfectly either.

Hot melt welding

With traditional soldering or clamping connection between terminal and conductor, you have two resistant barriers(solder has much bigger resistance than copper or silver). Our direct hot melt welding without solder connection removes two obstacles on signal path, by melting terminal and conductor into one material.

MRCT®. Mid-Range Control Technology

Allnic considers that an exaggerated, protruding mid-range is the most formidable obstacle to harmonious signal transfer. Allnic’s MRCT uses metal platings for slight mid-range “braking” and heavier wire gauges for low frequency transmission, and controls capacitance to ensure usually evasive superbly realistic high frequency reproduction.