TEAC TN-400BT-X Bluetooth Pladespiller, Valnød

TEAC TN-400BT-X Bluetooth Pladespiller, Valnød

3.995,00 DKK
Gå til produktoplysninger
TEAC TN-400BT-X Bluetooth Pladespiller, Valnød

TEAC TN-400BT-X Bluetooth Pladespiller, Valnød

3.995,00 DKK

The TN-400BT-X is an analog turntable that also allows users to listen to LP records wirelessly via Bluetooth® headphones & speakers. A die cast aluminum platter provides accurate rotational speed (3 settings) while an S shaped static balanced aluminum tone arm provides accurate tracking.

TURNTABLE FEATURES
Type:Manual
Drive method:Belt-drive
Speed:33 rpm
45 rpm
78 rpm
Wow & flutter:0.2% or less
Built-in preamp:Yes
S/N ratio:67dB
Cartridge:AT95E
Cartridge type:MM
Cartridge output:Voltage: 3.5mV (1kHz, 5cm/sec.). Balance: 2.0 dB (1kHz)
Tracking force:2g
Cartridge weight:5.7g
Including headshell:15.7g
Rec. cartridge weight:4-8g
Rec. cartridge weight (incl. headshell):14-18g
 
AUDIO OUTPUTS
Phono (MM):1
Output level & impedance phono (MM):3.5mV +/-3dB
RCA:1
Output level & impedance RCA:155 mV (−16 dBV)
Wireless:Bluetooth
 
DIMENSIONS AND WEIGHT
Product height:11.7cm
Product width:42cm
Product length:35.6cm
Product weight:4.9kg
Packsize height:22cm
Packsize width:55.5cm
Packsize length:43cm
Packaged weight:7.5kg
 

Overview

The TN-400BT-X is an analog turntable that also allows users to listen to LP r ecords wirelessly via Bluetooth® headphones & speakers. A die cast aluminum platter provides accurate rotational speed while an S-shaped static balanced aluminum tone arm provides accurate tracking. The built in Phono EQ amplifier enables the TN-400BT-X to be connected to a conventional hi-fi amplifier or a micro hi-fi system, while a universal type headshell allows users to change cartridges with ease.

A built in Bluetooth® transmitter also lets users listen to LP records wirelessly with high quality audio (thanks to the the aptX® and AAC codecs). 

 

Aluminum die-cast platter with 3 speed belt drive

A die cast, high inertia aluminum platter is driven by a high torque DC motor via a durable rubber flat-belt, giving immensely stable playback at 33 1/3, 45 and 78 rpm speeds.

New low resistance spindle

A precisely machined stainless steel spindle and durable brass bearing maintain accurate rotational speed, thanks to reduced friction

 

Built in Phono EQ amplifier

The TN-400BT-X has an onboard Phono EQ amplifier that supports MM type cartridges , allowing the deck to be connected to conventional amplifiers or micro systems that lack a dedicated turntable input. The Phono EQ amplifier employs a hi-fi quality NJM8080 op-amp chip (designed by JRC) which amplifies the tiny audio signal from the stylus with minimal distortion.

 

New subsonic filter for improved sound

By filtering out the frequencies below 18Hz, the TN-400BT-X prevents excess LF signal levels being sent to amplifiers, presenting an easier electrical load to any connected speakers. This filter is particularly effective when playing back warped vinyl records which would otherwise induce undesirable woofer movement (the subsonic filter is off when Phono EQ is THRU).

Læs mere HER

Se også